Blog-posts

Duet (Wifi/Ethernet) & Duex5
* Send files directly from Cura to print on the Duet card
* Setup E3D Chimera/Dual Head on Duet WiFi/RepRapFirmware – and watercooling intro
* BLTouch on Duet WiFi – Configuration and usage
*Duet WiFi – Activate and connect the WiFi… when it doesn’t work!
* Duet WiFi/Eth – Use M584 to autolevel or sync Z-axis using 2 or more motors
* Duet WiFi/Eth – PID tuning hotend
* Duet WiFi/Eth – Recover from Erase + basic setup
* PanelDue – Update firmware
* Duet WiFi – Adding a second extruder
* Using Duet with Cura and + Diamond Hotend and Firmware Retract
* BeTrue3D Printer – Setting up 5-way Diamond firmware
* BLTouch on Duet Wifi & DuetRepRapFirmware
* Duex5 – Use build in 12v switching regulator on 24v system
* Duet WiFi – Configuration walkthrough and adjust – Part 1
* Duet WiFi – binary “iap4e.bin” not found
* Duet WiFi – Generating firmware using Configurator
* Duet WiFi – Intro & Explained
* Duet Wifi – Update Firmware
* Duet Wifi – Getting started
 xBot Medium
* xBot Medium – Mechanical Parts – (BOM cont.)
* xBot Medium – Electronics and Electrical parts (BOM cont.)
* xBot Medium – Look at materials (custom BOM)
* xBot Medium – A new printer is baking!
 General 3D Printer Releated
* Send files directly from Cura to print on the Duet card
* 3D Printing Nylon
* RPi Zero Wireless – Video for Duet using MotionEYE OS
* Raspberry Pi Zero Wireless – Video for Duet
* Using Duet with Cura and + Diamond Hotend and Firmware Retract
* RPi Zero Wireless – Video for Duet using MotionEYE OS
* Raspberry Pi Zero Wireless – Video streaming
* Ultimaker 2 – Use 5v controlled fan to also get a 24v controlled fan.
* Use a SSR or Power-Expander to externally power Heated bed – Part 1
* While 3D printing
* Spot bent 8mm rod in Ultimaker 2
 BeTrue3D Printer Building
* Using Duet with Cura and + Diamond Hotend and Firmware Retract
* BeTrue3D Printer – Setting up 5-way Diamond firmware
* BeTrue3D Printer build part 9 – LEDs – 12v from 24v Duex5
* BeTrue3D Printer build part 8 – Carriage for 5way Diamond Hotend
* BeTrue3D Printer build part 7 – CoreXY and Front Panel
* BeTrue3D Printer build part 6 – X sliders metalworking
* BeTrue3D Printer build part 5 – LEDs
* BeTrue3D Printer build part 4 – Printbed
* BeTrue3D Printer build part 3 – Assembling everything (almost)
* BeTrue3D Printer build part 2
* New build – BeTrue3D Printer
Lets build an Ultimaker
* Ultimaker – Fintuning nozzle distance from bed
* Lets build an Ultimaker 2+ Extended clone – Part 5 – Lets buy stuff 3 – DIY – Motors, LEDs and more
* Lets build an Ultimaker 2+ Extended clone – Part 4 – Buy stuff 2 – Motors + Cables
* Lets build an Ultimaker 2+ Extended clone – Part 3 – Buy stuff 1 – Controller, Z-stage
* Lets build an Ultimaker 2+ Extended clone – Part 2 – Using Aliexpress
* Lets build an Ultimaker 2+ Extended Clone – Part 1 – Source files and BOM
MKS Sbase – Smoothieware
* Smoothieware – MKS Sbase – Controller Basics and Intro
Marlin Firmware – The theory behind it, can be used on all printers.
* Configuring Endstops, Ramps 1.4 With Marlin Firmware @section Homing
* Motion Configuration on Ramps 1.4 With Marlin Firmware @section Machine